First, you need to determine which leg is causing the wobble. A little woodworker’s knowledge helps here. Make sure the piece of furniture is on a completely level surface. Look at two legs diagonal to one another. Is one of them off the ground? That’s your troublesome leg. Another way is to place your level tool in the center of the item. Once the bubble hits the center, see which leg is floating. Mark this leg so you don’t forget which one it is.
Now, flip the piece upside down. Clean the base of the leg with some rubbing alcohol or a damp cloth to ensure a strong bond. While drying, apply a generous dot of glue to a penny, but not so much that it covers the entire penny. After all, you don’t want the adhesive squeezing out near the edges, leaving you panicking when you have glue on your skin. Wait until the glue is slightly tacky, then press the coin onto the end of the leg. Wipe off any excess using an old rag. Hold the penny to the leg of the furniture until it doesn’t come off when pulled — refer to the instructions on the packet of glue for how long this will take. Flip the item back over to test if it’s still wobbly, or check it with your level tool. If it’s still shaky, repeat the process with more pennies.
Credit: Source link